Posted: 18 March 2011 08:52 AM
I’m somewhere between a beginner to intermediate snowboarder. Just picked up snowboarding again last month after a 7-year hiatus. Didn’t realize how much I missed or enjoyed it. Ended up buying a Ride Control 155 board with Burton Prophecy bindings and size 8 DC Judge BOA for a great deal. I plan on taking the new setup out 2-4 times before all the snow melts.
Though I’m still beginner-intermediate (since I can link turns most of the time), I was thinking of picking up a Burton Custom Flying V 2011 model for when I advance further by next season because it’s the end of the season and I can get it for a great price. However, I heard the 2012 Custom Flying V will be a bit different and the same as the 2011 Custom Flying V Squeezebox. Knowing this, is it probably best to wait for the 2012 Custom Flying V model?
BTW, I think the Custom Flying V is supposed to be ideal for me since I rather be an all-mountain rider and the mixed camber gives a nice overall feel for various conditions. Not likely to hit the parks since I’m older and don’t want to break any bones. =) But if someone recommends something else, please let me know.
And I’m getting some contradictory information on sizing. I’m 5’6” at 137lbs (nude). With boots and snow gear, I’m sure that tacks on another 5lbs or so.
So here’s a few more questions I have to ask:
1. Are the weight recommendations based on weight without clothes or with clothes and gear on?
2. For 137lbs, Burton recommends 148 for 100% match. But other places said the board should be between the chin and nose, which is why I have the 155 (comes up to my nose).
3. If I do get another snowboard, should I get different bindings if I plan on using both? Or will the constant installing/removing bindings be bad for the snowboard and bindings themselves?
Sorry for all the questions, but I’m still a big noob when it comes to snowboarding. Any advice is much appreciated. Thx in advance!
Posted: 18 March 2011 10:08 AM
Hi Tonto,
First off, you are completely right the Custom Flying V is being changed for the 2011/12 season, and the change is the introduction of the Squeezebox core profile. Squeezebox is a core profile where the core thickness gets thinner under the feet and thicker between the bindings and for and aft of the bindings too. This is the complete opposite to the negative core profile which is currently used in this year’s Custom Flying V. I’m afraid I’m yet to ride next year’s Custom so I can’t really advise you as to which one is better, but it seems to me that Burton wouldn’t make such a radical change if the board wouldn’t benefit from it. The current Flying V is a fun board but as you’ve probably found from your research on the internet it can lack a little grip on ice and hard pack and the dampening could do with ramping up a little, but in general it’s a good board. If you are in no rush to purchase your new board it might be best to hold on until reviews start appearing in August… although there is a risk that the Custom you’ve spotted at a deal price might sell.
With your height and weight I would put you on either the 151 or 154, as you mentioned you aren’t interested in the park you might find you enjoy the additional effective edge for grip and volume for float of the 154.
Will you need new bindings? Burton have caught yo out a little here. The bindings you need for the Custom are ICS bindings which have the mount on the outside of the foot. They screw down with two bolts. If you have your current burton bindings mounted to a Ride board I’m guessing you mount with 4x m6 hardwear through the baseplate. You probably have the converter plate lying about somewhere but from what I’m told, ICS works much better if you use the correct bindings. Changing your bindings between boards every once in a while isn’t too bad for your boards inserts, it does wear the bolts out and forget about the nylock on the bolts after 3-4 changes, but it’s not too bad.
Rich
Posted: 19 March 2011 01:36 AM
Hi Rich!
Thanks for the helpful advice! I think I will wait to see what the reviews say about the Custom Flying V 2012 model. If it’s favorable, then I’ll opt for that instead. After all, getting the 2011 model now is not going to help me. And if I prefer the 2011 model, then perhaps I can get it cheaper because of the 2012 model.
As for the bindings, the Burton Prophecy I have supports 4-hole, 3-hole, and EST. However, I do not see the mounting slot on the outside. But I do have the what they call the channel backplates. The Burton user manual needs some editing cause it’s a bit confusing.
Perhaps it would be easier to get new bindings, like you said, with the ICS side-mount slots. This way, it’s easier to make adjustments without popping out the bottom foam cover to get to the base plates.
But if I don’t get new ICS bindings and the nylock bolts (I assume you are referring to the vertical nylon strip along the bolt) wear out after removing and mounting 3-4 times, where can I get new ones? I may have to make some adjustments anyway on the angle and setback on the current board.
Thx for the help!
Posted: 04 July 2011 10:29 AM
Will you need new bindings? Burton have caught yo out a little here. The bindings you need for the Custom are ICS bindings which have the mount on the outside of the foot. They screw down with two bolts. If you have your current burton bindings mounted to a Ride board I’m guessing you mount with 4x m6 hardwear through the baseplate.
_____________________________
adults bee costumes sexy lingerier Beginner Pack Sexy Cop Costumes