Choosing the right set-up

Posted: 24 December 2011 01:29 PM

Hi everyone

To start off.. MERRY CHRISTMAS YA’LL!

So i have bought a Rides crush 2012 and i dont know what bindings go nicely like peanut butter and jelly with this deck. help plz!

Posted: 25 December 2011 12:33 AM

Hey mate, merry christmas to you!

Did you already check our Binding Buying Guide?
As you’re basically looking for a jib-bindings, you will find some suggestions in one of the first passages.

Cheers Tobi

Posted: 25 December 2011 01:11 PM

Yeah im just looking for light bindings to make my set light and flexy. Im looking at the k2s hurrithanes. will they match the board(the screws and so on)?

Posted: 27 December 2011 01:01 AM

If you want light bindings, and don’t want to pay for the carbon fibre and nano tech bindings out there, one of the lightest bindings you can get are Union’s Contact Pro’s.  They are a beefed up version of their rocker-specific Contact (smaller connection tot he board, thereby allowing a truer board flex).

I have a pair of the 2011’s and they are lighter than anything else I’ve tried.

Ride use a standard binding mounting system on their boards so any bindings should work.  There’s no real point getting any EST bindings from Burton as they are made specifically for their own proprietary Channel system, but if you’re after bindings from Burton - I’d recommend the Cartels - you’ll be wanting re:flex or standard bindings.